Pottsboro, TX SWPPP & Stormwater Requirements

Rip-rap slope protection along a detention pond on a Grayson County construction site

Updated August 2026

Pottsboro is the small program with real teeth on Lake Texoma's doorstep — the city kept its stormwater obligations even after the census lines moved.

What does Pottsboro require for SWPPP compliance?

The census lines moved; the obligations did not. Pottsboro is no longer located in an urban area based on the 2020 US Census, but is still required to maintain a stormwater management program due to TCEQ's policy of 'once regulated, always regulated.' Crews that assume a small lake town has no stormwater program get surprised here.

Plans before plats, controls before dirt

In Pottsboro, generally all new development with the exception of single-family homes must plat and submit construction plans that include an erosion control plan, and the city requires stormwater pollution prevention plans with developments larger than one acre. In Pottsboro, earth disturbance may not occur until all construction site erosion protection BMPs have been installed. The sequence is the point — the erosion control plan rides the construction plans, and the BMPs go in before anything else moves.

An inspection rhythm with reports to match

Pottsboro's construction inspections occur at a minimum of every two weeks and after rain events, and inspection reports from the contractor are required for each inspection. The contractor's own reports feed the city's records, which means the paper trail is checked, not assumed.

The state permit still applies

The city's rules sit on top of the state's, not in place of them. A stormwater pollution prevention plan (SWP3) must be prepared and implemented before construction activities begin. TXR150000's standard schedule requires construction site inspections at least once every 14 calendar days and within 24 hours of the end of a storm event of 0.5 inches or greater. The town's program and the state permit run together for the life of the disturbance.

Inspections and the record

The operator owns the inspection record from first disturbance to final stabilization. Terradyne provides routine SWPPP inspection reports with cloud-based client access. See SWPPP Inspections for how the program works, and Silt Fence Installation for the perimeter the reviewers will look at first.

Check before you mobilize

Ordinances and city standards get revised; confirm the current documents with the city before you mobilize. For other North Texas cities, start at Local Compliance.

Frequently Asked Questions

Pottsboro is not in an urban area anymore — does the MS4 program still apply?

Yes. The town's program stayed in force when the census lines moved — the section above carries the town's own statement of why, and the inspection rhythm that comes with it.

When do Pottsboro's construction inspections happen?

At a minimum every two weeks and after rain events, with the contractor's inspection reports required each time and reviewed into the city's records.

Does the state permit still apply inside Pottsboro?

Yes — the town's program is the local layer, and the state program's obligations run from the first disturbance to final stabilization.

Request a bid

Send your Pottsboro project's plans to bids@terradynegroup.com or call (214) 878-7392 for SWPPP and erosion control support. Tell us the acreage and the schedule, and we will bring the plan, the controls, and the inspection cadence the city expects.

Request a Bidbids@terradynegroup.com(214) 878-7392